Jumpers; Table C.3-6 - Jumpers - Newport ESP6000 User Manual

C - 2 8
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
RS_A
The RS_A input is pulled-up to +5 volts with a 1KΩ resistor. The signal is
buffered with a 26LS32 differential receiver. The RS_A encoder encoded
signal originates from the stage position feedback circuitry and is used for
position tracking.
RS_B
The RS_B input is pulled-up to +5 volts with a 1KΩ resistor. The signal is
buffered with a 26LS32 differential receiver. The RS_B encoder encoded
signal originates from the stage position feedback circuitry and is used for
position tracking.
C.3.5 Jumpers
Terminal block board jumper functions are listed in Table C.3-6.
Reference Designation
JMP1-JMP6
JMP7
Table C.3-6 — Jumpers
Function
DC/Stepper Motor Selection
External Power Supply Selection