Figure 4.1-7 - Setup Faults Sub-Menu - Newport ESP6000 User Manual

Section 4 — Windows Utilities
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Default settings for ESP-compatible devices can be modified from the
PID and trajectory tabs. Select Save from the Tool Bar to save the
parameters to ESP6000 controller non-volatile flash EPROM memory.
4.1.3.2.2 Faults
The Faults menu includes a Setup Faults sub-menu which enables a user to
indicate a selection of events to be triggered if specified faults occur. A
user can also enable and disable checking for faults.
Select FAULTS to access the Setup Faults sub-menu (see Figure 4.1-7)
Figure 4.1-7 — Setup Faults Sub-Menu
Select the appropriate axis and fault(s) for a tab or combination of tabs
(each tab includes the same fault categories).
NOTE
4 - 7