Safety Considerations - Newport ESP6000 User Manual

Motion controller/driver
Table of Contents

Advertisement

1.2

Safety Considerations

1 - 2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The following general safety precautions must be observed during all phases
of operation of this equipment. Failure to comply with these precautions
or with specific warnings elsewhere in this manual violates safety standards
of design, manufacture, and intended use of the equipment.
Disconnect or do not plug in the power cord in the following circumstances:
– If the power cord or any other attached cables are frayed or damaged.
– If the power plug or receptacle is damaged.
– If the unit is exposed to rain or excessive moisture, or liquids are
spilled on it.
– If the unit has been dropped or the case is damaged.
– If you suspect service or repair is required.
– When you clean the case.
To protect the equipment from damage and avoid hazardous situations,
follow these recommendations:
– Do not open the UniDrive6000 except to replace the rear power line
panel fuses and power supply board fuse (see Appendix B, Trouble
Shooting). There are no user-serviceable parts inside the UniDrive.
– Do not make modifications or parts substitutions.
– Return equipment to Newport Corporation for service and repair.
– Do not touch, directly or with other objects, live circuits inside the unit.
– Do not operate the unit in an explosive atmosphere.
– Keep air vents free of dirt and dust.
– Do not block air vents.
– Keep liquids away from unit.
– Do not expose equipment to excessive moisture (>90% humidity).
All attachment plug receptacles in the vicinity of this unit are to be of
the grounding type and properly polarized. Contact an electrician to
check faulty or questionable receptacles.
This product is equipped with a 3-wire grounding type plug. Any
interruption of the grounding connection can create an electric shock
hazard. If you are unable to insert the plug into your wall plug
receptacle, contact an electrician to perform the necessary alterations to
assure that the green (green-yellow) wire is attached to earth ground.
WARNING
WARNING

Advertisement

Table of Contents
loading

This manual is also suitable for:

Unidrive6000

Table of Contents