Figure 4.1-11 - Setup Hardware Servo Dac Offset Tab; Figure 4.1-12 - Setup Hardware Travel Limit Tab - Newport ESP6000 User Manual

Use the Digital I/O tab to define port direction. Select bits in the Bit
Settings sub-panel to designate the bits for output (red illumination
indicates a HIGH logic level).
Figure 4.1-11 — Setup Hardware Servo DAC Offset Tab
Use the Servo DAC Offset tab to designate voltage (±1 volt maximum)
offset on the servo digital-to-analog outputs for each axis. Input a value to
set compensation.
Figure 4.1-12 — Setup Hardware Travel Limit Tab
4 - 1 0
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com