Digital I/O Cable; Table 8.1-3 - Digital I/O Cable Connections - Newport ESP6000 User Manual

8 - 4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Power-down personal computer or external power supply

8.1.3 Digital I/O Cable

The digital I/O cable is a 50-50 ribbon cable designed for use with the
ESP6000 controller card. The cable has a 24-channel digital signal capacity
for interfacing devices. Refer to the Windows Motion Utility Setup Hard-
ware sub-menu, Digital I/O tab to configure devices for use. The cable is
shown in Figure 8.1-3, connections are listed in Table 8.1-3, and connector
pin-outs are provided in Appendix C.
Table 8.1-3 — Digital I/O Cable Connections
ESP6000 Controller Card
Reference Designation
JP4
Power-down personal computer or external power supply
WARNING
before connecting any equipment.
N97108A
Figure 8.1-3 — Digital I/O Cable
To Device
(D-Sub Connector)
Customer-specified
WARNING
before connecting any equipment.