Table 8.1-1 - Terminal Block Board Functions - Newport ESP6000 User Manual

Reference
Designation
J1-J6
J7
J8
J9
J11A/B-J16A/B
8 - 2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
N97105
Connector and lead functions are listed in Table 8.1-1. Refer to Appendix C
for connector orientations and jumper settings.
Description
15-pin connectors
100-pin connector
Leads for optional
power supply
Leads for non-motion
signals
Leads for stages
(axis 1-6)
For systems configured with a personal computer, the terminal block
board draws power from the personal computer power supply through the
100-pin cable. If an external power supply is connected to the terminal
block board, the board will draw power from the external source instead
of the PC.
Figure 8.1-1 — Terminal Block Board
Table 8.1-1 — Terminal Block Board Functions
To Device
(Connector)
MD4 motion device
(input connector)
ESP6000 controller card
(controller connector)
Customer-specified
power supply
Customer-specified
Customer-specified
Cable Part Number(s)
Supplied with device
22947-01
Supplied with device
Customer-provided
Customer-provided