Electric Pto Clutch Replacement - Toro TITAN Service Manual

Mower Spindle Assembly (continued)

Electric PTO Clutch Replacement

Electric PTO Clutch Removal
Titan Service Manual
3438-774 Rev A
9. Install the washer and nut. Torque the top nut to 138-152 N • m (100-110 ft-lb).
g322063
1. Engine Pulley to Shaft (Apply Anti-Seize)
2. Bolt
3. Clutch Stop Mount
1. Park the machine on a level surface and disengage the PTO. Stop the
engine, wait for all moving parts to stop, and remove key.
2. Disconnect the battery by removing the negative cable first, then the positive
cable from the battery.
3. Raise and support the unit so that the drive wheels are off the ground.
4. Remove the mower belt.
5. Disconnect the clutch wire connector from the clutch.
6. Remove the clutch mounting bolt and washers. Slip the clutch off of the
crankshaft.
Figure 81
4. Clutch Isolator
5. PTO Clutch
6. Clutch Mounting Bolt (Apply Loctite)
Page 7–11 Mower Deck: Service and Repairs