Install A Power Supply - Oracle SPARC T7-4 Service Manual

5. Pull the power supply out of the server.
6. Install the replacement power supply.
See "Install a Power Supply" on page
Related Information
"Power Supply Configuration" on page 147
■
"Power Supply and AC Power Connector LEDs" on page 150
■
"Determine Which Power Supply Is Faulty" on page 151
■
"Install a Power Supply" on page 153
■
"Verify a Power Supply" on page 156
■

Install a Power Supply

The power supply is a hot-service component that can be replaced by a customer.
Caution - This procedure requires that you handle components that are sensitive to electrostatic
discharge. This discharge can cause failure of server components.
Open the latch on the replacement power supply, and align the power supply
1.
with the empty bay.
153.
Install a Power Supply
Servicing Power Supplies 153