Install A Power Supply - Oracle SPARC T8-1 Service Manual

Install a Power Supply

Caution -
supply. Otherwise, the server might overheat due to improper airflow. If a new power supply is
not available, leave the failed power supply installed until it can be replaced.
Install a new power supply.
5.
See "Install a Power Supply" on page
Related Information
"Locate a Faulty Power Supply" on page 77
■
"Install a Power Supply" on page 80
■
Install a Power Supply
1. If necessary, release the CMA to access the power supplies.
See "Release the CMA" on page
Do not allow the CMA to hang unsupported while it is unattached.
2. Align the power supply with the empty power supply chassis bay.
3. Slide the power supply into the bay until it is fully seated.
80 SPARC T8-1 Server Service Manual • January 2022
Whenever you remove a power supply, you should replace it with another power
51.
80.