Configuration Of The Pressure Transmitter Using The Optional Lcd Hmi With Keypad (Menu-Controlled) - ABB 266 DDS Manual

26 2 6 6 D D S H A R T | P R E S S U R E T R A N S M I T T E R S | O I/ 2 6 6 D D S - E N R E V. B
. . .Hardware settings
Figure 48a: Dip switches position on HART communication board
Configuration of the pressure transmitter
using the optional LCD HMI with keypad
(menu-controlled)
The integral LCD option (L1 option) is connected on the
266 HART communication board. It can be used to
visualize the process measured variables as well as to configure
the display and the transmitter.
In addition, diagnostic information is provided. To access the
functionality of the HMI an activation procedure needs to be
carried out.
Figure 49: Display keypad of L1 LCD display options
The keys (1) , (4) , (2)
menu-controlled configuration.
• The menu/submenu name is shown at top of LCD display.
• The number/line of the currently selected menu item is
displayed in the upper right of the LCD display.
• A scroll bar is located on the right edge of the LCD display
which shows the relative position of the currently selected
menu item within the menu.
• Both of the keys (1) and (4)
The meaning of these buttons is displayed below in the LCD
display above the respective button.
• You can browse through the menu or select a number within a
parameter value using both keys (2)
button (4) selects the desired menu item.
and (3) are available for the
can have various functions.
and (3) . The