Program Control - Single Block; Cursor - Siemens SINUMERIK 840D Operator's Manual

09.01
3.4.1 Program control – Single block
Selection
© Siemens AG, 2001. All rights reserved
SINUMERIK 840D/810D Configuring the OP 030 Operator Interface (FBO) – 09.01 Edition
Use the cursor and the Input key to select the boxes (left column).
A cross appears in the box to the right of the selected box as soon as
the PLC has sent a message confirming that the function has been
selected.
of
•
SBL1 Single block with stop after every block that triggers a
machine function.
•
SBL2 Stop after every block.
Selection between display of
•
all blocks or
•
only traversing blocks.
Fig. 3-7 Program control – Single block
Operator's Guide (BA)
3 Operation
BA/3-23