Measurement Of A Tool Length Of Two Tools With Orientation - Siemens SINUMERIK 840D sl Function Manual

Input variable
$AC_MEAS_SET_COORD
$AC_MEAS_ACT_PLANE
$AC_MEAS_T_NUMBER
$AC_MEAS_D_NUMBER
$AC_MEAS_TOOL_MASK
$AC_MEAS_DIR_APPROACH
$AC_MEAS_INPUT[0] = 1
$AC_MEAS_TYPE
* optional
The following output variables are written for measurement type 23:
Output variable
$AC_MEAS_RESULT[0]
$AC_MEAS_RESULT[1]
$AC_MEAS_RESULT[2]
$AC_MEAS_RESULT[3]
$AC_MEAS_RESULT[4]
$AC_MEAS_RESULT[5]
8.4.5.5

Measurement of a tool length of two tools with orientation

Tool orientation
Tools oriented towards the tool carrier must be marked by $AC_MEAS_TOOL_MASK =
0x200. The calculated tool lengths are then included negatively.
Extended Functions
Function Manual, 09/2009, 6FC5397-1BP20-0BA0
8.4 Setting zeros, workpiece measuring and tool measuring
Description
Coordinate system of setpoint *
Calculated as active plane unless otherwise specified *
Calculated as active T unless otherwise specified (T0) *
Calculated as active D unless otherwise specified (D0) *
Tool position, radius *
Approach direction *
The calculated tool lengths are written to the data management *
23
Description
Tool length in x
Tool length in y
Tool length in z
Tool length L1
Tool length L2
Tool length L3
M5: Measuring
673