Setting The Default Settings Of The Path Object - Siemens SIMOTION Function Manual

Sample Project for the Path Interpolation

4.7 Setting the default settings of the path object

Parameterize the interconnections of the path object as follows:
● 1. Path axis: Axis_Z
● 2. Path axis: Axis_X
Figure 4-11 Interconnecting a path object
4.7 Setting the default settings of the path object
The settings described below must be made for the default of the path object.
How to set the defaults for the path object:
1. For the path object, click Default.
104
TO Path Interpolation
Function Manual, 11/2010