P333T-Pwr Power Over Ethernet Stackable Switch; P333T-Pwr Switch Important Safety Instructions - Avaya CMC1 Installation, Upgrades And Additions

Installing and Cabling the Cabinets
It's power requirements are consistent with the 1152A1 PDU voltage and power ratings.
Refer to Appendix B in the user's guide that comes with the unit for voltage and power
ratings.
To connect telephones and other end devices to the 1152A1 PDU:
1. Connect an Ethernet cable to the telephone using an external splitter or directly (if the
device is Power over LAN Enabled).
2. Connect the opposite end of the same cable to the RJ45 wall outlet.
3. On the front panel of the 1152A1 PDU, monitor the response of the corresponding port LED.
If it lights up GREEN, the unit has identified your telephone as a Power over LAN

P333T-PWR Power over Ethernet Stackable Switch

The P333T-PWR power supply complies with the Underwriters Laboratories Inc. (UL) standard
UL 1950, second edition.
For safety instructions, see
installation instructions, see

P333T-PWR switch Important Safety Instructions

Please read the following helpful tips. Retain these tips for later use.
When using this switch, the following safety precautions should always be followed to reduce
the risk of fire, electric shock, and injury to persons.
Read and understand all instructions.
Follow all warnings and instructions marked on this switch.
This product can be hazardous if immersed in water. To avoid the possibility of electrical
shock, do not use it near water.
The Avaya P333T-PWR switch and modules contain components sensitive to electrostatic
discharge. Do not touch the circuit boards unless instructed to do so.
This product should be operated only from the type of AC (and optional DC) power source
indicated on the label. If you are not sure of the type of AC power being provided, contact
a qualified service person.
110 Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
Table 17: P333T-PWR UL 1950 Compliance
Complies UL 1950
Approved C22.2 No.950 Std.
Approved CE
P333T-PWR switch Important Safety Instructions
Connect the P333T-PWR switch
on page 110. For
on page 111.