Concluding Steps - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

Converting a floorstand model to a rack model
Ê Install the rack front cover, see section
page 67.
15.3

Concluding steps

"Reassembling" on page 67
Ê
Ê Mount the support bracket and rack mounting rails in the rack, see the "Rack
Mounting Kit - RMK-F2 Drop-In" Mounting Instructions.
I
For Japan:
The document is available online at
(http://www.fujitsu.com/jp/products/computing/servers/primergy/man
ual/.
The printed poster is contained in the rack mounting kit.
Ê Connect all external cables.
"Connecting the power cord" on page 78
Ê
"Switching on the server" on page 80
Ê
Ê Update your server's chassis information on the Chassis ID EPROM
integrated into the front panel board. For further information on how to obtain
and use the ChassisId_Prom Tool, see section
Tool" on page
Ê Change the chassis model setting to "rack server", see section
the chassis model" on page
440
121.
123.
Upgrade and Maintenance Manual
"Installing the rack front cover" on
http://manuals.ts.fujitsu.com
"Using the Chassis ID Prom
"Specifying
TX1330 M4