Ssd; Installing An M.2 Ssd; Preliminary Steps - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

System board and components
14.5 M.2 SSD
The system board offers two M.2 slots (Key M) with support for 42 mm, 60 mm,
80 mm and 110 mm long M.2 SSDs. With the M.2 SSD an internal SSD is
offered. This SSD can be configured as a boot device or data storage device.

14.5.1 Installing an M.2 SSD

Upgrade and Repair Unit
(URU)
Tools: – Phillips PH1 / (+) No. 1 screw driver
– Hexagon screw driver

14.5.1.1 Preliminary steps

"Shutting down the server" on page 53
Ê
"Disconnecting the power cord" on page 54
Ê
"Getting access to the component" on page 55
Ê
Ê Remove the system fan module, see section
module" on page 81
Ê If applicable, remove the SAS expander holder without disconnecting
cables, see section
Position the SAS expander holder on the HDD cages to get more space.
Ê If applicable,"Removing expansion cards" on page 285
402
"Removing the SAS expander holder" on page
Upgrade and Maintenance Manual
Hardware: 5 minutes
Software: 15minutes
"Removing the system fan
256.
TX1330 M4