Installing Accessible Drive Dummy Covers; Concluding Steps; Replacing The Hdd/Ssd Backplane Or Pcie Ssd Backplane On The 8X 2.5-Inch Hdd/Ssd Extension Box; Preliminary Steps - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

Hard disk drives (HDD) / solid state drives (SSD)
7.5.3.3

Installing accessible drive dummy covers

Ê Install accessible drive filler covers into empty drive bays, see section
"Accessible drive filler covers" on page
Ê Install accessible drive covers into the front cover, see section
drive covers" on page
7.5.3.4

Concluding steps

"Reassembling" on page 67
Ê
"Connecting the power cord" on page 78
Ê
"Resuming BitLocker functionality" on page 117
Ê
"Switching on the server" on page 80
Ê
7.5.4 Replacing the HDD/SSD backplane or PCIe SSD
backplane on the 8x 2.5-inch HDD/SSD extension
box
Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver
7.5.4.1

Preliminary steps

"Locating the defective server" on page 51
Ê
"Shutting down the server" on page 53
Ê
"Disconnecting the power cord" on page 54
Ê
Ê Remove all HDD/SSD modules from the HDD extension box, see section
"Removing 2.5-inch HDD/SSD modules" on page
"Getting access to the component" on page 55
Ê
Ê Unlock and pull the 8x 2.5-inch HDD/SSD extension box out of its installation
bays, see section
page 234.
236
92.
"Removing the 8x 2.5-inch HDD/SSD extension box" on
Upgrade and Maintenance Manual
90.
Hardware:10 minutes
207.
"Accessible
TX1330 M4