Installing The Side Cover - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

Basic hardware procedures
4.5.2.3

Installing the side cover

Figure 32: Installing the side cover (floorstand model)
Ê Open the locking lever on the side cover.
Ê Fit the side cover on the chassis, recessed by 2 cm.
Ê Close the locking lever on the side cover (1). This will slide the top cover shut
engaging the locking mechanism (2).
Ê Connect all cables except the power cord to the server rear.
76 Upgrade and Maintenance Manual
TX1330 M4