Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual page 217

Figure 130: Removing the defective 2.5-inch HDD/SSD SAS backplane (A)
Ê Remove four screws from the defective 2.5-inch HDD/SSD SAS backplane
(see circles).
Figure 131: Removing the defective 2.5-inch HDD/SSD SAS backplane (B)
Ê Fold up the defective 2.5-inch HDD/SSD SAS backplane (1) and at a slight
angle, remove it from the recesses in the HDD cage (2).
TX1330 M4
Hard disk drives (HDD) / solid state drives (SSD)
Upgrade and Maintenance Manual 217