Appendix A
# of
Description
Beep
6
Flash update is failed
8
Platform PCI resource
requirements cannot
be met
472
Action
A processing bar and an error message is
displayed on the screen.
This beep code is only an information.
Ê Check the connection of your expansion
card whether it is installed in a correct
slot.
Ê Enter the BIOS setup menu.
Ê Open the Advanced menu.
Ê Check in the PCI Subsystem Settings the
parameter Above 4G Decoding.
This parameter must be set to Enabled.
Upgrade and Maintenance Manual
TX1330 M4