Connecting Cables To The Sas Expander Board - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

Hard disk drives (HDD) / solid state drives (SSD)
7.6.1.3

Connecting cables to the SAS expander board

2.5-inch HDD/SSD configurations
Figure 165: Connecting cables to expander board (example 24x 2.5-inch HDDs/SSDs)
Ê Connect the cables to the SAS expander board:
Cable
1 SAS cable
2 SAS cable
3 SAS cable
4 SAS cable
5 SAS cable
6 SAS cable
7 SAS cable
8 SAS cable
9 Power cable
I
For the cable plan, see chapter
252
Connector on
backplane/controller
Backplane 1: X9
Backplane 1: X10
Backplane 2: X9
Backplane 2: X10
Backplane 3: X9
Backplane 3: X10
SAS controller: MLC1
SAS controller: MLC2
Backplane 2: X17
"Appendix B" on page
Upgrade and Maintenance Manual
SAS MLC1
SAS MLC2
Connector on
SAS expander board
X10
X11
X12
X13
X14
X15
X1
X2
X3
477.
TX1330 M4