Installing Accessible Drives; Preliminary Steps; Removing Accessible Drive Dummy Covers; Installing Mounting Brackets To Rdx Backup Drives - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

Accessible drives
12.2

Installing accessible drives

Upgrade and Repair Unit
(URU)
Tools: Slotted screw driver (for bending in or out accessible drive mounting
brackets)
Phillips PH2 / (+) No. 2 screw driver (for installing mounting brackets)

12.2.1 Preliminary steps

"Shutting down the server" on page 53
Ê
"Disconnecting the power cord" on page 54
Ê
"Getting access to the component" on page 55
Ê
I
The front cover only needs to be removed in order to remove
accessible drive dummy covers.

12.2.2 Removing accessible drive dummy covers

Ê Remove accessible drive filler covers from the required bays, see section
"Accessible drive filler covers" on page
Ê Remove accessible drive covers, see section
page 92.

12.2.3 Installing mounting brackets to RDX backup drives

This section is not applied for Japan.
Backup drive mounting brackets are contained in mounting kit S26361-F3753-
E1 (to be ordered separately with the backup drive).
I
No new mounting brackets are available when replacing a backup drive
during service.
Ê If applicable, remove existing mounting brackets from the backup drive.
342 Upgrade and Maintenance Manual
Hardware: 10 minutes
90.
"Accessible drive covers" on
TX1330 M4