Installing A System Fan; Installing The New System Fan; Running The Fan Cables - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

Fans
8.2.3

Installing a system fan

8.2.3.1

Installing the new system fan

Ê Insert the system fan into the air duct.
I
Take note of the mounting direction! The labels of all system fans
must show to the rear (see figure 174).
Figure 177: Installing the system fan in the air duct
Ê Push the system fan on the snap rivets (1).
I
Notice the position of the fan cable. Ensure that the fan cable is not
pressed.
Ê Insert and tightly push the four safety pins into the snap rivets (2).
Ê Take note of the air flow (3).
8.2.3.2

Running the fan cables

Ê Insert the fan cable in the corresponding guidings (see figure
174).
266 Upgrade and Maintenance Manual
173 and figure
TX1330 M4