Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual page 191

Figure 109: Installing the 3.5-inch HDD bay top cover (B)
Ê Place the intrusion switch holder on the HDD bay top cover as shown (1).
Ê Push the intrusion switch holder under the front chassis rim so that the hole
of screws can match with (2).
Figure 110: Installing the 3.5-inch HDD bay top cover (C)
Ê Fasten the HDD bay top cover to the chassis with five screws (see blue
circles).
Ê Fasten the intrusion switch holder on the HDD bay top cover with one screw
(see orange circle).
TX1330 M4
Hard disk drives (HDD) / solid state drives (SSD)
Upgrade and Maintenance Manual 191