Removing The Fbu - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

9.5.2.2

Removing the FBU

Figure 209: Removing the FBU holder from the chassis
Ê Lift up the green locking handle on the FBU holder (1) while sliding the FBU
holder in the direction of the arrow as far as it will go (2).
I
After that, the shoulder screw caps on the chassis will rest in the wide
ends of the keyhole slots on the FBU holder.
Ê Lift the FBU holder out of the chassis (3).
TX1330 M4
Upgrade and Maintenance Manual
Expansion cards and backup units
305