Concluding Steps; Removing The Ultraslim Odd; Preliminary Steps; Removing The 4X 3.5-Inch Hdd Extension Box - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

Accessible drives

12.6.1.4 Concluding steps

"Reassembling" on page 67
Ê
"Connecting the power cord" on page 78
Ê
"Switching on the server" on page 80
Ê

12.6.2 Removing the ultraslim ODD

Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver

12.6.2.1 Preliminary steps

"Removing backup and optical disk media" on page 99
Ê
"Shutting down the server" on page 53
Ê
"Disconnecting the power cord" on page 54
Ê
"Getting access to the component" on page 55
Ê
I
The front cover only needs to be removed in order to remove
accessible drive dummy covers. If the HDD extension box is already
installed in the server and will be removed in order to install an
ultraslim ODD, skip this step.

12.6.2.2 Removing the 4x 3.5-inch HDD extension box

Ê Remove the 4x 3.5-inch HDD extension box, see section
3.5-inch HDD extension box" on page
364 Upgrade and Maintenance Manual
Hardware: 10 minutes
246.
"Removing the 4x
TX1330 M4