Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual page 253

3.5-inch HDD/SSD configurations
Figure 166: Connecting cables to expander board (example 12x 3.5-inch HDDs)
Ê Connect the cables to the SAS expander board:
Cable
1 SAS cable
2 SAS cable
3 SAS cable
4 SAS cable
5 SAS cable
6 Power cable
I
For the cable plan, see chapter
TX1330 M4
Hard disk drives (HDD) / solid state drives (SSD)
Connector on
backplane/controller
Backplane 1: X9
Backplane 2: X9
Backplane 3: X9
SAS controller: MLC1
SAS controller: MLC2
Backplane 2: X17
"Appendix B" on page
Upgrade and Maintenance Manual
SAS MLC1
SAS MLC2
Connector on
SAS expander board
X10
X11
X12
X1
X2
X3
477.
253