Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual page 439

Ê Fit the rack mounting bracket with the FUJITSU logo on the two hooks on
the right side of the rack front bezel (1).
Ê Firmly press down on the rack mounting bracket until it is fully seated in the
rack front bezel (2).
Ê Mount the second rack mounting bracket to the left side of the rack front
bezel accordingly.
Figure 312: Installing accessible drive dummy covers
Ê If available, reinstall all accessible drive dummy covers into their original
locations (rotated by 90 degrees):
Ê Ensure that an accessible drive filler cover has been installed in every
empty drive bay.
Ê Turn the front cover face down.
Ê Join the two lugs on one edge of the accessible drive cover with the right
inner edge of the front cover (1).
Ê Fold down the accessible drive cover until it snaps in place (2).
I
Use the dummy covers that have been removed from the front cover
during the preliminary steps.
TX1330 M4
Converting a floorstand model to a rack model
Upgrade and Maintenance Manual 439