Converting A Floorstand Model To A Rack Model; Preliminary Steps - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

15 Converting a floorstand model to
a rack model
Field Replaceable Unit
(FRU)
Tools: – Phillips PH2 / (+) No. 2 screw driver
– Slotted screw driver
Safety notes
For more information, see chapter
15.1

Preliminary steps

"Shutting down the server" on page 53
Ê
"Disconnecting the power cord" on page 54
Ê
Ê Remove all external cables.
"Getting access to the component" on page 55
Ê
"Removing the anti-tilt bracket" on page 95
Ê
TX1330 M4
"Important information" on page
Upgrade and Maintenance Manual
Hardware: 20 minutes
37.
427