7.6
SAS expander board
7.6.1
Installing the SAS expander board
Field Replaceable Unit
(FRU)
Tools: Phillips PH2 / (+) No. 2 screw driver
7.6.1.1
Preliminary steps
"Suspending BitLocker functionality" on page 97
Ê
"Shutting down the server" on page 53
Ê
"Disconnecting the power cord" on page 54
Ê
"Getting access to the component" on page 55
Ê
7.6.1.2
Installing the SAS expander board
Figure 164: Installing the SAS expander board
Ê Position the SAS expander board on the SAS expander holder. Notice the
recesses and hooks (see arrows).
Ê Push the SAS expander board in the direction of the arrow (1).
Ê Fasten the SAS expander board with one screw M3 x 4.5 mm (see circle).
TX1330 M4
Hard disk drives (HDD) / solid state drives (SSD)
Upgrade and Maintenance Manual
Hardware: 10 minutes
251