Removing Accessible Drive Dummy Covers; Installing The Multibay Box - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

Figure 248: Mounting the slimline ODD module in the Multibay box
Ê Insert the slimline ODD module into the Multibay box (1) and push back until
the locking tab (2) engages.

12.5.1.4 Removing accessible drive dummy covers

Ê If applicable, remove the accessible drive filler cover from installation bay 1,
see section "Accessible drive filler covers" on page
Ê If applicable, remove the accessible drive cover from installation bay 1, see
section "Accessible drive covers" on page

12.5.1.5 Installing the Multibay box

Ê Ensure that the four mounting brackets in installation bay 1 have not been
bent out (see figure 241).
Ê Open the locking bar, see section
on page 86.
TX1330 M4
"Opening the accessible drive locking bar"
Upgrade and Maintenance Manual
Accessible drives
90.
92.
353