Connecting Cables; Installing The Expander Board - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

Hard disk drives (HDD) / solid state drives (SSD)

7.4.10.7 Connecting cables

Figure 141: Connecting cables to the backplane (example 16x 2.5-inch HDD/SSD)
Ê Connect the cables to the backplane:
1 SAS expander board power cable
2 SAS cable to backplane connector "X10"
3 If applicable, OOB cable
4 Power cable
5 SAS cable to backplane connector "X9"
I
For the cable plan, see chapter

7.4.10.8 Installing the expander board

Ê Install the expander board, see section
on page 251.
226
"Appendix B" on page
Upgrade and Maintenance Manual
"Installing the SAS expander board"
477.
TX1330 M4