Replacing The M.2 Ssd; Preliminary Steps - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

System board and components
"Connecting the power cord" on page 78
Ê
"Switching on the server" on page 80
Ê

14.5.3 Replacing the M.2 SSD

Upgrade and Repair Unit
(URU)
Tools: – Phillips PH1 / (+) No. 1 screw driver

14.5.3.1 Preliminary steps

"Locating the defective server" on page 51
Ê
"Shutting down the server" on page 53
Ê
"Disconnecting the power cord" on page 54
Ê
"Getting access to the component" on page 55
Ê
Ê Remove the system fan module, see section
module" on page 81
Ê If applicable, remove the SAS expander holder without disconnecting
cables, see section
Position the SAS expander holder on the HDD cages to get more space.
Ê If applicable, "Removing expansion cards" on page 285
14.5.3.2 Replacing the M.2 SSD
Ê Remove the defective M.2 SSD, see section
page 406.
Ê Install the new M.2 SSD, see section
408
"Removing the SAS expander holder" on page
Upgrade and Maintenance Manual
Hardware: 5 minutes
Software: 15 minutes
"Removing the system fan
"Removing the M.2 SSD" on
"Installing an M.2 SSD" on page
256.
402.
TX1330 M4