Installing The 8X 2.5-Inch Hdd/Ssd Extension Box; Preliminary Steps; Removing Accessible Drive Dummy Covers; Installing The Hdd/Ssd Or Pcie Ssd Backplane - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

7.5.2

Installing the 8x 2.5-inch HDD/SSD extension box

Upgrade and Repair Unit
(URU)
Tools: Slotted screw driver (for bending in or out accessible drive mounting
brackets)
7.5.2.1

Preliminary steps

"Suspending BitLocker functionality" on page 97
Ê
"Shutting down the server" on page 53
Ê
"Disconnecting the power cord" on page 54
Ê
"Getting access to the component" on page 55
Ê
7.5.2.2

Removing accessible drive dummy covers

Ê Remove accessible drive filler covers from the required bays, see section
"Accessible drive filler covers" on page
Ê Remove accessible drive covers, see section
page 92.
7.5.2.3

Installing the HDD/SSD or PCIe SSD backplane

Ê If applicable, install the HDD/SSD backplane or the PCIe backplane on the
8x 2.5-inch HDD/SSD extension box, see section
HDD/SSD backplane" on page
TX1330 M4
Hard disk drives (HDD) / solid state drives (SSD)
239.
Upgrade and Maintenance Manual
Hardware:10 minutes
90.
"Accessible drive covers" on
"Installing the new
229