Installing The Cpu Heat Sink - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

Processor (CPU)

11.2.6 Installing the CPU heat sink

Figure 227: Installing the heat sink
Ê Carefully seat the heat sink on the four threaded holes as shown.
V
CAUTION!
– Ensure that the screws on the heat sink are properly seated on the
threaded holes.
– Ensure that the heat sink cooling fins match the direction of the
airflow!
Ê Fasten the four captive screws on the heat sink in a crossover pattern (screw
torque: 0.6 Nm, not applicable for Japan) (1-4).
330 Upgrade and Maintenance Manual
TX1330 M4