12.7.3 Replacing the ultraslim ODD
Upgrade and Repair Unit
(URU)
Tools: – Phillips PH0 / (+) No. 0 screw driver
– Slotted screw driver (for bending in or out accessible drive
mounting brackets)
12.7.3.1 Preliminary steps
"Locating the defective server" on page 51
Ê
"Removing backup and optical disk media" on page 99
Ê
"Shutting down the server" on page 53
Ê
"Disconnecting the power cord" on page 54
Ê
"Getting access to the component" on page 55
Ê
I
Removing the front cover is not required in order to replace the
ultraslim ODD.
12.7.3.2 Removing the defective ultraslim ODD
Ê Remove the ultraslim ODD adapter, see section
drive" on page
Ê Remove the ultraslim ODD, see section
the ultraslim ODD adapter" on page
12.7.3.3 Installing the new ultraslim ODD
Ê Install the ultraslim ODD, see section
ultraslim ODD adapter" on page
Ê Install the ultraslim ODD adapter, see section
on page
344.
TX1330 M4
348.
Upgrade and Maintenance Manual
Hardware: 10 minutes
"Removing an accessible
"Removing the ultraslim ODD from
372.
"Installing the ultraslim ODD into the
369.
"Installing an accessible drive"
Accessible drives
373