Installing The 2.5-Inch Hdd/Ssd Bay Top Cover; Installing The 16X 2.5-Inch Hdd/Ssd Front Panel - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

7.4.10.5 Installing the 2.5-inch HDD/SSD bay top cover

Ê Install the 2.5-inch HDD/SSD bay top cover, see section
inch HDD/SSD bay top cover" on page

7.4.10.6 Installing the 16x 2.5-inch HDD/SSD front panel

Figure 140: Securing the 16x 2.5-inch HDD/SSD front panel
Ê Fit the three hooks on the 2.5-inch HDD/SSD front panel into the slots in the
server front (see orange arrows).
Ê Firmly press down on the HDD front panel until its upper edge is flush with
the chassis (see blue arrow).
Ê Fasten the HDD front panel to the server front with four screws (see circles).
TX1330 M4
Hard disk drives (HDD) / solid state drives (SSD)
Upgrade and Maintenance Manual
"Installing the 2.5-
219.
225