Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual page 425

"Updating or recovering the BIOS and the iRMC S5" on page 102
Ê
Ê If applicable, activate TPM functionality in the system BIOS under Security
> TPM (Security Chip) Setting > Security Chip. For more information,
refer to the corresponding BIOS Setup Utility reference manual.
"Verifying system information backup/restore" on page 103
Ê
"Looking for MAC/WWN/GUID and SAS addresses" on page 118
Ê
"Updating the NIC configuration file in a Linux and VMware environment" on
Ê
page 116
"Resuming BitLocker functionality" on page 117
Ê
Ê If applicable, reconfigure your network settings in the operation system
according to the original configuration of the replaced controller (expansion
card or onboard).
I
Configuration of network settings should be performed by the
customer. For more information, see section
settings recovery" on page
Ê If applicable, restore LAN teaming configurations, see section
replacing a system board" on page
TX1330 M4
288.
122.
Upgrade and Maintenance Manual
System board and components
"Note on network
"After
425