System board and components
Figure 280: Removing the TPM spacer
Ê Using a flat nose pliers, press together the hooks on the TPM spacer and
remove it from the system board (2).
I
If the TPM is to be replaced, the TPM spacer may remain on the
system board.
Ê Install the system board, see section
page 422
14.3.2.3 Concluding steps
Ê If applicable, install the SAS expander board, see section
expander board" on page
Ê If applicable, install the expansion cards
page 279
Ê Install the system fan module, see section
on page 83
"Resuming BitLocker functionality" on page 117
Ê
"Reassembling" on page 67
Ê
"Connecting the power cord" on page 78
Ê
"Switching on the server" on page 80
Ê
394
251.
Upgrade and Maintenance Manual
"Installing the new system board" on
"Installing expansion cards" on
"Installing the system fan module"
"Installing the SAS
TX1330 M4