Concluding Steps; Replacing The Irmc Microsd Card; Preliminary Steps - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

System board and components

14.4.2.3 Concluding steps

Ê Install the system fan module, see section
on page 83
"Reassembling" on page 67
Ê
"Connecting the power cord" on page 78
Ê
"Switching on the server" on page 80
Ê

14.4.3 Replacing the iRMC microSD card

Upgrade and Repair Unit
(URU)
Tools: a pair of side-cutting pliers

14.4.3.1 Preliminary steps

"Locating the defective server" on page 51
Ê
"Shutting down the server" on page 53
Ê
"Disconnecting the power cord" on page 54
Ê
"Getting access to the component" on page 55
Ê
Ê Remove the system fan module, see section
module" on page 81
14.4.3.2 Replacing the iRMC microSD card
Ê Remove the defective iRMC microSD card, see section
iRMC microSD card" on page
V
CAUTION!
The microSD card contains customer information. After replacing the
microSD card, hand the defective card over to the customer. If the
customer requests disposal of the defective microSD card, proceed
as follows:
Ê Using a pair of side-cutting pliers, cut the microSD card in half.
400
399.
Upgrade and Maintenance Manual
"Installing the system fan module"
Hardware: 5 minutes
"Removing the system fan
"Removing the
TX1330 M4