Removing The Defective Tpm; Installing The New Tpm; Concluding Steps - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

System board and components

14.3.3.2 Removing the defective TPM

Ê Remove the TPM, see section
Ê Leave the TPM spacer on the system board when removing the defective
TPM.

14.3.3.3 Installing the new TPM

I
The TPM spacer is already present on the system board.
Ê Install the TPM, see section

14.3.3.4 Concluding steps

Ê If applicable, "Installing expansion cards" on page 279
Ê If applicable, install the expander board, see section
expander board" on page
Ê Install the system fan module, see section
on page 83
"Reassembling" on page 67
Ê
"Connecting the power cord" on page 78
Ê
"Switching on the server" on page 80
Ê
"Resuming BitLocker functionality" on page 117
Ê
I
You can find information on configuring the TPM in the corresponding
BIOS Setup Utility reference manual.
396
"Removing the TPM" on page
"Installing the TPM" on page
251.
Upgrade and Maintenance Manual
388.
"Installing the SAS
"Installing the system fan module"
391.
TX1330 M4