Configuring Lan Teaming; After Replacing/Upgrading Lan Controllers; After Replacing A System Board - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

Basic software procedures

5.2.18 Configuring LAN teaming

Use ServerView Operations Manager to obtain more information on existing
LAN teams:
Ê In ServerView Operations Manager Single System View select System
Status from the Information/Operation menu.
Ê Under Network Interfaces select LAN Teaming.
Ê The Network Interfaces (Summary) overview shows all configured LAN
teams and their components. Choose a LAN team to display further details:
– LAN Team Properties: Properties of the selected LAN team
– LAN Team Statistics: Available statistics about the selected LAN team
I
For more information, see the "ServerView Operations Manager - Server
Management" user guide.

5.2.18.1 After replacing/upgrading LAN controllers

Ê You need to restore the configuration for the LAN Teaming, using the LAN
driver utility or OS teaming software.
Ensure that the controllers have been assigned as primary or secondary
according to your requirements.
I
For more information, see the relevant LAN driver manual.

5.2.18.2 After replacing a system board

I
The following procedure must be done for each system board that is
replaced.
Ê Confirm with the customer whether the onboard LAN controller you have
replaced has been used as part of a LAN teaming configuration.
Ê If LAN teaming has been active, you will need to restore the configuration
using the LAN driver utility or OS teaming software.
I
For more information, see the relevant LAN driver manual.
122 Upgrade and Maintenance Manual
TX1330 M4