Installing A 2.5-Inch Hdd/Ssd Module - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

Hard disk drives (HDD) / solid state drives (SSD)
7.4.6.3

Installing a 2.5-inch HDD/SSD module

Figure 123: Opening the 2.5-inch HDD/SSD module locking lever
Ê Pinch the green locking clips (1) and open the locking lever (2).
Figure 124: Installing the 2.5-inch HDD/SSD module
Ê Insert the HDD/SSD module into a drive bay and carefully push back as far
as it will go (1).
Ê Close the locking lever to lock the HDD in place (2).
Ê When using a RAID array, add the additional HDD/SSD to the RAID array.
I
Configuring the RAID array, see the documentation of the RAID
controller, used in your configuration, see section
need at hand" on page
206
33.
Upgrade and Maintenance Manual
"Documents you
TX1330 M4