Hard disk drives (HDD) / solid state drives (SSD)
7.5.6.2
Removing the 4x 3.5-inch HDD extension box
Ê Remove all cables from the 4x 3.5-inch HDD extension box backplane.
Ê If applicable, remove all cables from the slimline ODD.
Ê Open the accessible drive locking bar, see section
drive locking bar" on page
Figure 158: Removing the HDD extension box
Ê Carefully pull the 4x 3.5-inch HDD extension box out of its installation bays.
Ê Close the locking bar, see section
on page
88.
246
86.
"Closing the accessible drive locking bar"
Upgrade and Maintenance Manual
"Opening the accessible
TX1330 M4