Installing The 8X 3.5-Inch Hdd Front Panel; Installing The 3.5-Inch Hdd Bay Top Cover - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

Hard disk drives (HDD) / solid state drives (SSD)

7.3.11.5 Installing the 8x 3.5-inch HDD front panel

Figure 114: Securing the 8x 3.5-inch HDD front panel
Ê Fit the three hooks on the HDD front panel into the slots in the server front
(see orange arrows).
Ê Firmly press down on the HDD front panel until its upper edge is flush with
the chassis (see blue arrow).
Ê Fasten the HDD front panel to the server front with four M3 x 4.5 mm screws
(see circles).

7.3.11.6 Installing the 3.5-inch HDD bay top cover

Ê Install the HDD bay top cover, see section
top cover" on page
196
190.
Upgrade and Maintenance Manual
"Installing the 3.5-inch HDD bay
TX1330 M4