Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual page 431

Removing the accessible drive cage
Ê Remove the front panel module, see section
panel module" on page
Ê If applicable, remove all accessible drives, see section
accessible drive" on page
Ê If applicable, remove an HDD extension box, see section
boxes" on page
Figure 303: Detaching the accessible drive cage (A)
Ê Remove two screws from the bottom side of the server as shown.
Ê Bring the server back to its horizontal position.
I
At least two people are needed to turn over a fully equipped server.
Remove HDDs and PSUs in order to facilitate the task.
TX1330 M4
Converting a floorstand model to a rack model
377.
348.
228.
Upgrade and Maintenance Manual
"Removing the defective front
"Removing an
"HDD extension
431