Expansion cards and backup units
Figure 198: Installing the riser card
Ê Insert the PCI adapter board in slot 1 (1).
Ê Fit the riser card onto the two spacer bolts (2).
Ê Fasten the riser card with the two screws (3).
Ê Connect the power cable (4).
Ê Install the expansion card in the riser card slot, see section
expansion cards" on page
9.4.4.4
Concluding steps
Ê If applicable, install the SAS expander holder, see section
SAS expander holder" on page 254
Ê Install the system fan module, see section
on page 83
"Reassembling" on page 67
Ê
Ê When working on a rack-mounted server:
"Sliding the server into the rack" on page 72
Ê Connect all external cables to the expansion card installed in the riser card
slot.
"Connecting the power cord" on page 78
Ê
"Switching on the server" on page 80
Ê
292
279.
Upgrade and Maintenance Manual
"Installing the
"Installing the system fan module"
"Installing
TX1330 M4