Slimline Odd In Multibay Box; Installing The Slimline Odd; Preliminary Steps; Removing The Odd Dummy Module - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

12.5

Slimline ODD in Multibay box

12.5.1 Installing the slimline ODD

Upgrade and Repair Unit
(URU)
Tools: – Phillips PH2 / (+) No. 2 screw driver
– Slotted screw driver (for bending in or out accessible drive
mounting brackets)

12.5.1.1 Preliminary steps

"Shutting down the server" on page 53
Ê
"Disconnecting the power cord" on page 54
Ê
"Getting access to the component" on page 55
Ê
Ê If applicable, "Removing the Multibay box" on page 356

12.5.1.2 Removing the ODD dummy module

Ê Press up on the locking tab to disengage the slimline ODD dummy module
(see figure 252).
Ê From inside the Multibay module, press out on the ODD dummy module and
pull it out of its bay.
TX1330 M4
Upgrade and Maintenance Manual
Accessible drives
Hardware: 10 minutes
351