Connecting Cables - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

Hard disk drives (HDD) / solid state drives (SSD)
7.5.5.6

Connecting cables

Figure 157: Connecting cables to the 4x 3.5-inch HDD extension box
Ê Connect the cables to the backplane:
1 If applicable, OOB cable
2 SAS cable
I
3 Power cable
Ê If applicable, connect the SATA cable of the ultraslim ODD to the system
board (see section
I
For the cable plan, see chapter
244
For more information about connecting SAS cables to the
SAS expander board, see section
expander board" on page
"Installing the ultraslim ODD" on page
Upgrade and Maintenance Manual
"Installing the SAS
251.
"Appendix B" on page
360).
477.
TX1330 M4