System Board; Replacing The System Board - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

14.7

System board

14.7.1 Replacing the system board

Field Replaceable Unit
(FRU)
Tools: Replacing the system board:
– Phillips PH2 / (+) No. 2 screw driver
– Magnifying glass for inspecting CPU socket springs
(recommended)
Replacing the TPM:
– Bit screw driver
– flat nose pliers
– TPM bit insert
– thin slotted screw driver (2 x 0.4 mm)
( )
* For Japan:
– Dedicated TPM screw driver (CWZ8291A)
– TPM module fixing tool (S26361-F3552-L909)
Note on TPM
I
The system board can be equipped with an optional TPM (Trusted
Platform Module). This module enables third party programs to store key
information (e. g. drive encryption using Windows Bitlocker Drive
Encryption).
If the customer is using TPM functionality, the TPM has to be removed
from the defective system board and connected to the new system
board. For a detailed description, see
The TPM is enabled in the system BIOS.
V
CAUTION!
– Before replacing the system board, ask the customer whether TPM
functionality is used.
TX1330 M4
( )
*
Upgrade and Maintenance Manual
System board and components
Hardware: 50 minutes
Software: 10 minutes
( )
*
"Replacing the TPM" on page 395.
417